86-95 Specs.

Year	1986
Output - SAE net Horsepower Torque	200 hp @ 4000 rpm
Output - SAE net Horsepower Torque	285 ft-lb @ 3000 rpm
Induction System Fuel Management Air Intake Fuel Pump (pressure)	Single Throttle Body, 58mm bore, 540 cfm, sequential electronic fuel injection, 19 lb-hr injectors, Tuned Length Aluminum intake manifold, EEC-IV engine control
	Remote low-restriction air cleaner
	Electric In-tank Pump, 39 psi
Camshaft Type I.O./I.C./Lift E.O./E.C./Lift Duration - Int/Exh Valve Lift - Int./Exh. (1.6 rocker arm ratio) Overlap Firing Order	E5ZE-6250-AA
	Steel cam, roller lift
	17°/69°/0.278
	67°/19°/0.278
	266°/266°
	0.444"/0.444"
	36°
	13726548
Camshaft Drive	Roller Chain
Piston	E6ZE-6110-BA (9.2:1 cr) forged, ring thickness and ring tension reduced; 30% on upper comp. ring & 35% on oil control ring
Cylinder Head	E6AE-6049-AA common with 5.0L passenger car
Water Pump (aluminum)	E6AE-8501-CA Pump efficiency improved. New 3.5" impeller and housing with exit scroll
Ignition Specs - Spark Plug Gap Initial Timing Centrifugal Advance Vacuum Advance Ignition Coil	AWSF-44
	0.050"
	10°BTC
	Spark advance controlled by EEC-IV computer
	Spark advance controlled by EEC-IV computer
	E core 38 kV output voltage
Cylinder Block	E6SE-6010-DC increased bore wall and deck material thickness. Siamesed bores in water jackets (126 lbs.)
Exhaust - Exhaust Manifold Manifold Gasket Exhaust Inlet Pipe Muffler / Tailpipe	Stainless Steel Tubular
	E4ZE-9448-AA
	"H" pipe 2.25" inlet, 2.25" outlet Dual Inline Catalyst
	Dual Exhaust (total system) 2.25" tube diameter
Crankshaft	E1AE-6303-AA
Flywheel Unbalance	E6ZR-6375-AA 50 oz-in.
Damper Unbalance	E4TE-6316-AA 32 oz-in.

Ford 86 Fuel Injected Mustang 5-speed Factory Specs